Single channel GT model:

• To enter programming mode hold down "PUSH-TO-TALK" switch on face of radio while turning radio on for  5 seconds.
• To set operating frequency use "SCROLL" button to select one of the eight frequency codes shown below for F1.
• Next to set "PL" code press "MENU" button once and the "SCROLL" to select one of 38 PL codes (including "off" for CSQ users) from table shown below.
• Press "PUSH-TO-TALK" to return to standard operating mode.

Two channel GT + model (channels 1 & 2 share one common PL value)

• To enter programming mode hold down "PUSH-TO-TALK" switch while turning radio on for  5 seconds.
• To set operating frequency for channel F1 use "SCROLL" button to select one of the eight frequency codes shown below.
• Press "MON" button once, "SCROLL" to channel "F2,"  to reenter programming mode press
  "MON" button a second time.
• To set operating frequency for channel F2 use "SCROLL" button to select one of the eight frequency codes shown below.
• "PL" code is the same for both channels.  To set  "PL" code for both channels press "MENU" button once and the "SCROLL" to select one of 38 PL codes  (including "off" for CSQ users) from table shown below.  The PL code is the same for all channels radio-wide.
• Press "PUSH-TO-TALK" to return to standard operating mode.